Test Result Confirmation Flow
WARNING: This page is about a different car, the 2002 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
- Using scan tool, check for current or pending DTCs. If any DTC is set or pending, perform appropriate testing procedure. See DIAGNOSTIC TROUBLE CODE DEFINITIONS . If no DTCs are set, go to next step.
- On scan tool, select READINESS TESTS mode. Check that testing has been completed. If READINESS TEST is complete and no DTC is stored, confirmation is complete. Go to, DIAGNOSIS & REPAIR PROCEDURE . If READINESS TEST is not completed, repeat DTC CONFIRMATION TEST .