LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> Aerio SX, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - A/T >> Diagnostic Information and Procedures >> DTC Check >> Reading DTC From TCM Using SUZUKI Scan Tool - Method 2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reading DTC From TCM Using SUZUKI Scan Tool - Method 2

  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1) located in underside of instrument panel at driver's seat side.

    Special tool: 

    (A):  SUZUKI scan tool

    Fig 1: Locating Data Link Connector
    G03159353Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn ignition switch ON.
  4. Read DTC according to instructions displayed on SUZUKI scan tool and print it down. Refer to SUZUKI scan tool operator's manual for further details.
  5. After completing the check, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC) (1).
scientia non olet · About LEMON Manuals