Manifold Absolute Pressure Sensor: Aerio
Disconnect MAP sensor from connector and remove. Measure voltage between "Vout" and "Ground" acording to test procedures found in Figure . Refer to MAP SENSOR OUTPUT SIGNAL (OFF- VEHICLE - AERIO) for voltage specifications and test conditions. If voltage is not within specification, replace MAP sensor.
MAP SENSOR OUTPUT SIGNAL (OFF- VEHICLE - AERIO)
| Altitude (Feet) | Vacuum (In. Hg) | Output Voltage |
|---|---|---|
| 0-2000 | 29.9-27.8 | 3.3-4.3 |
| 2001-5000 | 27.8-24.9 | 3.0-4.1 |
| 5001-8000 | 24.9-22.3 | 2.7-3.7 |
| 8001-10000 | 22.3-20.7 | 2.5-3.3 |