TCM Power and Ground Circuit Check: Troubleshooting
TCM Power And Ground Circuit Troubleshooting Table
| Step |
Action |
YES |
NO |
| 1 |
Check TCM power circuit.
- Disconnect TCM connector with ignition switch OFF.
- Check for proper connection to TCM at G08-20 terminal.
- If OK, turn ignition switch ON and check voltage at terminal G08-20 of disconnected TCM connector.
Is it 10-14 V? |
Go to Step 2. |
"BLK/WHT" circuit open. |
| 2 |
Check TCM ground circuit.
- Turn ignition switch OFF.
- With TCM connectors disconnected, check for proper connection to TCM at G08-15 terminal.
- If OK, check resistance between G08-15 / G08-19 terminal of disconnected TCM connector and body ground.
Is continuity indicated? |
TCM power and ground circuits are in good condition. |
"BLK" circuit open. |