Without Scan Tool

DTC Check
Automatic transaxle DTC can be checked using any one of the following 3 methods.

Displaying DTC on Odometer - Method-3
1. Turn ignition switch OFF.
2. Remove glove box (1) from instrument panel.
3. Using service wire, connect diagnosis switch terminal (3) with ground terminal (4) of monitor connector (color in Blue) (2).
4. Turn ignition switch ON.
5. Press reset button (5) and hold on pressing it.
6. Read DTC displayed on odometer (6). (For example, DTC No. 24 is displayed on odometer in the figure.)





7. After completing the check, release reset switch, turn ignition switch OFF and disconnect service wire from monitor connector (2).

NOTE: While DTC is displayed on odometer, "O/D OFF" lamp (7) and shift indicator (8) light together.