Actuator

ACTUATOR





1. Connect special tool, air compressor, actuator (1) and hoses as shown in the figure.

NOTE: Loosen adjusting screw of special tool before connecting hoses to special tool.

Special tool(A): 09918-18110








2. With pressure from compressor applied to special too, adjust pressure to specified level by turning adjusting screw of special tool and check actuator for operation.
Also, check that there is no air leakage from actuator.
Specified pressure for actuator inspection: 38.0 kPa (0.38 kg/cm2, 5.40 psi)
Actuator stroke 3 mm (0.118 inch)