- Take out fluid in P/S fluid reservoir with syringe or such.
- Disconnect high pressure pipe (1) from steering gear box by removing union bolt (2).
NOTE:
As fluid flows out of disconnected joints, put a receptacle under joints or a plug to pipe.
- Disconnect low pressure hose (3) from steering gear box by removing clamp (5).
NOTE:
As fluid flows out of disconnected joints, put a receptacle under joints or a plug to hose.
- Remove steering lower shaft bolt (4).
Courtesy of SUZUKI OF AMERICA CORP.
- Hoist vehicle and remove both right and left wheels.
- Disconnect both right and left tie-rod ends from knuckle, refer to
TIE-ROD END REMOVAL AND INSTALLATION
.
- Remove steering gear box mounting bolts (1) and then remove steering gear box from vehicle. Steering gear box found to be in defective condition should be replaced with a new one.
CAUTION:
Never disassemble P/S gear box. Disassembling will affect original performance of P/S gear box.
Courtesy of SUZUKI OF AMERICA CORP.