LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2001 >> XL-7 Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Basic Diagnostic Procedures) >> Circuit Tests >> B-4: Ignition System Check >> Aerio
April 5, 2026: LEMON Manuals is launched! Read the announcement.

B-4: Ignition System Check: Aerio

WARNING: This page is about a different car, the 2002 Suzuki XL-7, 2002 Suzuki Vitara, 2002 Suzuki Grand Vitara, 2002 Suzuki Esteem, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform engine system check.
  2. Check spark plugs for proper application, electrode wear, carbon deposits or insulator damage. If problem is found, replace as necessary. If spark plugs are okay, check spark. See SPARK TEST  under IGNITION TESTS in BASIC DIAGNOSTIC PROCEDURES article. If spark plugs and spark are okay, go to step  8. If spark plugs and spark do not test okay, go to next step.
  3. If any DTCs were retrieved during engine system check, perform appropriate test. If no DTCs were retrieved, go to next step.
  4. Check for proper connection to each ignition coil assembly at each terminal and at spark plug. Connect securely if needed. Go to next step.
  5. Check for open or short in ignition coil power and ground circuits. If no problem is found, go to next step. If problem is found, repair or replace as necessary.
  6. Substitute a known-good ignition coil assembly. Repeat step  2. If test result is okay, replace ignition coil assembly. If test result is not okay, go to next step.
  7. Check Camshaft Position (CMP) sensor circuits. If CMP sensor tests okay, substitute ECM with known good unit and repeat step  2. If CMP sensor does not test okay, replace or repair CMP sensor or CMP sensor circuits as necessary.
  8. Check ignition timing and timing advance. See IGNITION TIMING in ON-VEHICLE ADJUSTMENTS article. If timing and timing advance test okay, testing is complete. If timing and advance are not as specified, check timing belt installation, CKP sensor input signals related to ignition system. If problem is found, repair or replace as necessary.