LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2001 >> Vitara JS, 4D Utility, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.3L & 1.6L 4-Cylinder) >> Overhaul >> Cylinder Block Assembly >> Thrust Bearing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Thrust Bearing

WARNING: This page is about a different variant/trim than selected.
  1. With crankshaft bearing caps installed, check axial thrust clearance using dial gauge.
  2. Standard thickness of thrust bearing is .0984" (2.50 mm). Oversize thrust bearings are available in increments of .0049" (.125 mm). If clearance exceeds specification, replace thrust bearing. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals