Oil Pump: Inspection
WARNING: This page is about a different variant/trim than selected.
- Inspect oil pump housing for cracks or damage. Inspect oil screen for clogging or damage. Inspect oil screen "O" ring. Ensure relief valve slides smoothly in bore. Inspect pressure relief spring for damaged coils.
- Inspect oil pump gears for wear or damage. Using a feeler gauge, measure radial and side clearance. See Figure and Figure . If clearance exceeds specification, replace outer rotor or case. See OIL PUMP SPECIFICATIONS table.
OIL PUMP SPECIFICATIONS
| Application | Radial Clearance - In. (mm) | Side Clearance - In. (mm) |
|---|---|---|
| All Models | .0122 (.310) | .0059 (.150) |