LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2001 >> Vitara JS, 4D Utility, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Component Tests >> Hazard Warning Switch >> Swift
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hazard Warning Switch: Swift

  1. Disconnect negative battery cable. Ensure front wheels are in a straight-ahead position. Disable air bag restraint system. See appropriate AIR BAG RESTRAINT SYSTEMS article.
  2. Disconnect contact coil and multifunction switch harness connectors from junction/fuse block. See Fig 1. Using DVOM, check for continuity between appropriate contact coil and multifunction switch harness connector terminals, with hazard warning switch in specified position. See HAZARD WARNING SWITCH CONTINUITY (SWIFT)  table. If continuity is not as specified, replace multifunction switch. See CONTACT COIL & MULTIFUNCTION SWITCH  under REMOVAL & INSTALLATION.
HAZARD WARNING SWITCH CONTINUITY (SWIFT)

Switch Position (1) Terminal-To-Terminal Wire Colors
ON Green, Green/Red & Green/Yellow; White/Green & Yellow/Blue
OFF White/Green & Yellow Blue
(1) See Fig 1.
Fig 1: Identifying Junction/Fuse Block Connectors For Multifunction Switch (Swift)
G97E11118Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals