Oil Pump: Disassembly
NOTE:
Lubricate all parts with ATF. Coat thrust bearings and races with Transjel(R) Transmission Assembly Lubricant or petroleum jelly.
NOTE:
For special tool part numbers, refer to special tools list. See SPECIAL TOOLS
.
- Position oil pump on torque converter. Remove the oil pump seal from the oil pump body. Remove the oil pump thrust washer and bearing from the rear of the oil pump cover. Remove the oil pump seal rings.
- Remove the 6 oil pump body bolts from the oil pump cover. Remove the oil pump body. Remove the input shaft oil seal from the oil pump body.