DTC Confirmation Test
- Ensure intake air temperature is 18°F (-8°C) or more, vehicle is at an altitude of 8000 feet or below, engine coolant temperature is at 18-230°F (-8-110°C), fuel tank is 1/4 full, and barometric pressure is 75 kPa or more. Turn ignition off, connect scan tool and turn ignition on. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Drive vehicle at speeds of 50-60 MPH or more for 5 minutes.
- Check for DTC P0141. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC is not set, check completion status of HO2S monitoring test in READINESS TESTS mode. If testing has not been completed, go to next step.
- Drive vehicle at speeds of 50-60 MPH or more for 5 minutes. Check for DTC P0141. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM.