Lower Valve Body Reassembly
- Install the following primary regulator valve components:
- The valve. See Figure
.
- The spring.
- The plunger.
- The sleeve.
- The sleeve retainer.
- Install the following TCC lock-up control valve components. See Figure
:
- The spring.
- The sleeve.
- The locating pin.
- Install the following shift solenoid components:
- The intermediate coast modulator valves. See Figure
.
- The intercoast modulator valve spring.
- The low coast modulator valve spring.
- The gasket.
- The solenoid.
- The bolts. Tighten shift solenoid bolts to specification. See TORQUE SPECIFICATIONS
.
- Install a NEW "O" Ring to the TCC solenoid. See Figure
. Install the TCC solenoid. Install the TCC solenoid bolt. Tighten the bolt to specification. See TORQUE SPECIFICATIONS
.
- Install the following pressure relief valve components:
- Install the following TCC lock-up control valve plate components:
- The gasket.
- The plate.
- The bolts. Tighten TCC lock-up control valve plate bolts to specification. See TORQUE SPECIFICATIONS
.
- Install the following lower valve body plate components:
- The gasket.
- The plate.
- The bolts. Tighten lower valve body plate bolts to specification. See TORQUE SPECIFICATIONS
.
- Install the following components to the valve body:
- The ball valve spring.
- The valve body ball. See Figure
.
- The valve dampening spring.
- The check ball.
- The bypass valve spring.
- The bypass valve.