Engine Control Module: Service and Repair

CAUTION: As ECM/PCM consists of precision parts, be careful not to expose it to excessive shock.

REMOVAL
1. Disconnect negative cable (-) at battery.
2. Disable air bag system (if equipped) referring to "DISABLING THE AIR BAG SYSTEM".




3. Remove ECM/PCM cover (1) from bracket by removing clips (2).




4. Disconnect connectors from ECM/PCM (1).
5. Remove ECM/PCM (1) with bracket (2).

INSTALLATION
1. Install ECM/PCM with bracket to vehicle.
2. Connect connectors to ECM/PCM securely.
3. Install ECM/PCM cover to bracket.
4. Enable air bag system (if equipped) referring to "ENABLING AIR BAG SYSTEM".
5. Connect negative cable (-) to battery.