Blower Motor Resistor: Service and Repair

Blower Motor Resistor

REMOVAL




1. Disconnect negative (-) cable (2) at battery (1).
2. Disable air bag system. Refer to "DISABLING AIR BAG SYSTEM".




3. Open glove box (1), then remove screw (2).
4. Remove glove box (1).
5. Disconnect blower motor resistor lead wire at coupler.




6. Remove heater blower motor resistor (1) by loosening its fastening screw (2).

INSTALLATION
1. Install heater blower motor resistor with screws.
2. Enable air bag system. Refer to "ENABLING AIR BAG SYSTEM".