Disabling & Activating Air Bag System
WARNING:
Accidental air bag deployment is possible. Personal injury may result. Read and follow all WARNINGS and AIR BAG SAFETY PRECAUTIONS
before working on air bag system or related components.
- For diagnostics, go to next step. For component removal and installation, place front wheels in straight-ahead position. Turn ignition switch to LOCK position and remove ignition key. Disconnect negative battery cable. Wait 90 seconds.
- For diagnostics, place front wheels in straight-ahead position. Turn ignition switch to LOCK position and remove ignition key. Remove AIR BAG fuse from AIR BAG fuse box. See Fig 1 .
- Remove steering wheel side cap. Disengage Connector Position Assurance (CPA) clip and disconnect driver-side air bag module.
- Pull top of glove box outward while depressing stops. Allow glove box to fall toward passenger seat. Disengage CPA clip and disconnect Yellow connector for passenger-side air bag module.
- To activate air bag system, turn ignition switch to LOCK position and remove key. Reverse disabling procedure. Turn ignition switch to ON position and perform SYSTEM OPERATION CHECK .