Diagnosis & Repair Procedure
NOTE:
When preforming tests, take into consideration atmospheric pressure. Atmospheric pressure varies depending on weather conditions and altitude.
- Perform DTC CONFIRMATION TEST . If DTC P01451 is set, go to next step. If DTC P1451 is not set, problem is intermittent. System is okay at this time. See TROUBLE SHOOTING - NO CODES article.
- Turn ignition off. Connect scan tool. Turn ignition on. Select DATA LIST mode on scan tool. Observe manifold absolute pressure. See SENSOR OPERATING RANGE CHARTS article. Go to next step.
- If reading is within specification, replace PCM and go to DTC CONFIRMATION TEST . If reading is not within specification, check MAP sensor and MAP sensor circuit operation. Go to DTC P0106: MANIFOLD ABSOLUTE PRESSURE SENSOR CIRCUIT PERFORMANCE PROBLEM .