Power Mirror Motor
Remove garnish molding for access to power mirror electrical connector. See Fig 1
. It may be necessary to remove mirror from door for access to electrical connector. Disconnect power mirror harness electrical connector. Using 12-volt power source, connect positive and negative leads to specified terminals. See Fig 2
or Fig 3
. See POWER MIRROR MOTOR TEST
table. If power mirror motor does not operate as specified, replace power mirror assembly. See POWER MIRROR
under REMOVAL & INSTALLATION.
Courtesy of SUZUKI OF AMERICA CORP.
Courtesy of SUZUKI OF AMERICA CORP.
Courtesy of SUZUKI OF AMERICA CORP. POWER MIRROR MOTOR TEST
| Apply 12 Volts To Terminal No. |
Ground Terminal No. |
Mirror Operation |
| Esteem |
| 2 |
3 |
Up |
| 3 |
2 |
Down |
| 1 |
3 |
Left |
| 3 |
1 |
Right |
| Grand Vitara & Vitara |
| 1 |
3 |
Up |
| 3 |
1 |
Down |
| 2 |
3 |
Left |
| 3 |
2 |
Right |