LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2001 >> Swift GA, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Disc & Drum) >> Overhaul >> Front Brake Caliper >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Brake Caliper: Reassembly

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2000 Suzuki Vitara, 2000 Suzuki Swift, 2000 Suzuki Grand Vitara, 2000 Suzuki Esteem, and 1999 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply brake fluid to piston seal and install piston seal into caliper bore groove. Apply brake fluid to piston, cylinder bore and inside dust boot. Install dust boot onto piston.
  2. Insert piston with boot into caliper bore and install dust boot lip into cylinder groove. Push piston into caliper bore, ensuring boot remains in groove. Install dust boot retaining ring. Apply rubber grease to caliper slider bushing guide sleeves or slider pins and inner portion of sleeve boots, and install caliper.
Fig 1: Identifying Front Disc Brake Components (Esteem & Swift)
G96C19390Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Identifying Front Disc Brake Components (Grand Vitara & Vitara)
G96F19393Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals