Cylinder Block

Inspect block for distortion of deck surface. Inspect block and cylinders for cracks, scratches and other defects. Measure cylinder bores at 2 levels for wear, taper and out-of-round condition. If bore wear, taper or out-of-round condition exceeds specification, rebore cylinders. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS.

Fig 1: Loosening Crankshaft Bearing Bolts

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Tightening Crankshaft Bearing Bolts

Courtesy of SUZUKI OF AMERICA CORP.