Drivers Door Key Switch
Disconnect negative battery cable. Remove driver's door panel to gain access to door key switch connector. Using DVOM, check continuity between specified terminals of door key switch, with switch in appropriate position. See DRIVER DOOR KEY SWITCH CONTINUITY TEST table. See Figure . If continuity exists as described, driver's door key switch is okay. If continuity is not as described for either switch position, replace driver's door key switch.
DRIVER DOOR KEY SWITCH CONTINUITY TEST
| Switch Position | Continuity Between Terminals No. | ||
|---|---|---|---|
| Lock | 3 & 4 | ||
| Off | (1) | ||
| Unlock | 4 & 5 | ||
|
|||