Door Lock Actuator

On all models, disconnect power door lock actuator harness connector. Using fused jumper wires, momentarily apply battery voltage and ground across terminals of power door lock actuator. See Fig 1 , Fig 2 or Fig 3 . Door lock actuator should move in one direction. Reverse jumper wire connections. Door lock actuator should move in opposite direction. If door lock actuator does not function as described, replace faulty door lock actuator.

Fig 1: Identifying Driver's Door Lock Actuator (Passenger's Side Is Similar)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Identifying Rear Door Lock Actuator

Courtesy of SUZUKI OF AMERICA CORP.

Fig 3: Identifying Back Door (Liftgate) Lock Actuator

Courtesy of SUZUKI OF AMERICA CORP.