Stall Speed Test
CAUTION:
DO NOT maintain stall speed RPM for more than 5 seconds. Ensure at least a 30 second pause is taken at idle between tests.
- Ensure engine and transmission are at normal operating temperature. Check fluid level and add if necessary. Connect tachometer to vehicle and ensure it is visible to technician. Apply parking brake and block all 4 wheels.
- Start engine and depress brake pedal firmly. Place selector lever in "D" position. Depress accelerator pedal to full throttle and note maximum RPM obtained. Repeat test in "R" position. Stall speed should be 2280-2610 RPM.