Rear Differential Dismounting & Remounting: Remounting

Clean mating surfaces of rear axle and differential assembly and apply sealant "A" to axle side evenly.
"A": Sealant 99000-31110

Fig 1: Applying Sealant To Axle
Courtesy of SUZUKI OF AMERICA CORP.
Install differential assembly to axle and fix it with nuts (1) tightened to specified torque.
Tightening torque

Differential carrier nut (a): 55 N.m (5.5 kg-m, 40.0 lb-ft)

Fig 2: Installing Differential Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install propeller shaft to joint flange aligning match marks and torque flange bolts to specification.
Tightening torque

Propeller shaft flange bolt (a): 50 N.m (5.0 kg-m, 36.5 lb-ft)

Fig 3: Installing Propeller Shaft To Joint Flange
Courtesy of SUZUKI OF AMERICA CORP.
Install right and left rear axle shafts and drums. See INSTALLATION .
Install wheels.
Fill hypoid gear oil as specified and tighten plug to specification. Lower lift.