Shift Control Cable Adjustment

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Position the shift lever in PARK.

Fig 1: Identifying Shift Control Cable Adjustment Lock Cover Retaining Tab
Courtesy of SUZUKI OF AMERICA CORP.
Release the shift control cable adjustment lock cover retaining tab (1) on the bottom side.

Fig 2: Identifying Shift Control Cable Adjustment Lock Cover & Tabs
Courtesy of SUZUKI OF AMERICA CORP.
Slide the shift control cable adjustment lock cover (2) forward exposing the adjustment lock.
Carefully squeeze the adjustment lock tabs (1) inward to disengage the adjustment lock.

Fig 3: Lifting Shift Control Cable Adjustment Lock
Courtesy of SUZUKI OF AMERICA CORP.
Lift the shift control cable adjustment lock (3).
The shift control cable (1) and cable end (2) are free to slide to proper adjustment. Ensure the shift lever and transmission are both in the PARK position.

Fig 4: Depressing Shift Control Cable Adjustment Lock
Courtesy of SUZUKI OF AMERICA CORP.
Depress the shift control cable adjustment lock (1) to lock the adjustment.

Fig 5: Identifying Shift Control Cable Adjustment Lock Cover
Courtesy of SUZUKI OF AMERICA CORP.
Slide the shift control cable adjustment lock cover (1) over the adjustment lock.
Inspect the operation of the starting system with the shift lever in each position. The engine should only crank when the lever is in the PARK or NEUTRAL position.