Front Wiper/Washer Switch
Disconnect front wiper/washer switch connector. Ensure continuity exists across specified switch terminals with switch in appropriate position. See appropriate FRONT WIPER/WASHER SWITCH CONTINUITY table. Replace combination switch if continuity is not as specified.
FRONT WIPER/WASHER SWITCH CONTINUITY (ESTEEM)
| Switch Position |
Terminal-To-Terminal Wire Colors |
| OFF |
BLU & BLU/WHT |
| INT |
BLK, BLU & BLU/BLK |
| LOW Speed |
BLU & YEL/BLU |
| HIGH Speed |
YEL/BLU & BLU/RED |
| WASHER ON |
BLK & BLU/BLK |
FRONT WIPER/WASHER SWITCH CONTINUITY (GRAND VITARA & VITARA)
| Switch Position |
Terminal-To-Terminal |
| OFF |
As & +1 |
| INT |
|
| LOW Speed |
B3 & +1 |
| HIGH Speed |
B3 & +2 |
| WASHER ON |
|
FRONT WIPER/WASHER SWITCH CONTINUITY (SWIFT)
| Switch Position |
Terminal-To-Terminal Wire Colors |
| With Intermittent Wiper |
| OFF |
BLU & BLU/WHT |
| INT |
|
| LOW Speed |
BLU & YEL/BLU |
| HIGH Speed |
YEL/BLU & BLU/RED |
| WASHER ON |
|
| Without Intermittent Wiper |
| OFF |
BLU & BLU/WHT |
| LOW Speed |
BLU & YEL |
| HIGH Speed |
BLU/RED & YEL |
| WASHER ON |
BLU/BLK & YEL |