LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Vitara JS, 4D Utility, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul - Aw03-72LE & Aw03-73LE >> Component Disassembly & Reassembly >> Center Support Assembly >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Center Support Assembly: Reassembly

CAUTION: Clutch discs should be soaked in ATF for 15 minutes prior to installation. Lubricate all parts with ATF.
  1. Lubricate "O" rings with ATF. To reassemble, reverse disassembly procedure. Ensure end gap of snap ring does not align with claw area of either piston return spring. Install plates and discs in appropriate order. See Figure .
  2. Install No. 1 brake flange and No. 2 brake flange with chamfered edge facing clutch discs. Install snap rings. Ensure ends of snap rings do not align with notches in center support.
  3. Recheck piston stroke of No. 1 brake and No. 2 brake. See Figure and Figure . If piston stroke is not as specified, check for incorrect reassembly of components. Reassemble sun gear shaft and No. 1 one-way clutch. See Figure . While turning one-way clutch, install sun gear shaft assembly into center support. Install snap ring on end of sun gear shaft.
scientia non olet · About LEMON Manuals