LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Vitara JS, 4D Utility, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater Systems >> Component Tests >> Blower Motor Resistor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Motor Resistor

  1. Blower motor resistor is mounted in front lower blower motor housing. Disconnect wiring harness connector from blower motor resistor. Using DVOM, measure resistance between blower motor resistor High and Low terminals. See Fig 1 . Resistance should be about 2.0 ohms.
  2. Measure resistance between blower motor resistor High and M1 terminals. See Fig 1 . Resistance should be about 1.0 ohms.
  3. Measure resistance between blower motor resistor High and M2 terminals. See Fig 1 . Resistance should be about 0.5 ohms. If resistances are not as specified, replace blower motor resistor. See BLOWER MOTOR RESISTOR  under REMOVAL & INSTALLATION.
Fig 1: Identifying Blower Motor Resistor Terminals
G00011738Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals