LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Vitara JS, 4D Utility, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Engine Sensors & Switches >> Heated Oxygen Sensor (Ho2S) No. 2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Oxygen Sensor (Ho2S) No. 2

  1. Start engine and allow it to reach normal operating temperature. Pull back seal at HO2S No. 2 connector. Using a voltmeter, backprobe HO2S No. 2 connector between sensor signal and sensor ground terminals. See Figure.
  2. Increase engine speed to 2000 RPM and hold for about one minute while observing voltmeter. Voltage readings should have slight fluctuations above and below .3 volts. If voltage is not as specified, see DTC P0136 and P0420 in appropriate SELF-DIAGNOSTICS article.
scientia non olet · About LEMON Manuals