Grand Vitara & Vitara
Disconnect multifunction switch assembly at steering column. Using ohmmeter, measure resistance between switch terminals SW and GND. See Fig 1 . See MULTIFUNCTION SWITCH ASSEMBLY RESISTANCE table. If resistance is not as specified, replace multifunction switch assembly. See REMOVAL & INSTALLATION in STEERING COLUMN SWITCHES article.
MULTIFUNCTION SWITCH ASSEMBLY RESISTANCE
| Cruise Switch Position | Specification (Ohms) |
|---|---|
| OFF | Infinite |
| CANCEL | Zero |
| COAST/SET | 200-240 |
| RESUME/ACCEL | 820-1000 |