Remove & Install or Remove & Replace
WARNING: This page is about the Vitara JLS, 4D Utility, 1.6, which is a different variant/trim than selected.
DOES NOT include adjust Steering Knuckle preload or toe-in.
NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both Sides. | 2.2 | 1.4 | B | |
| One Side | 1.6 | 1.1 | B | |
| Combination Procedure: AXLE SHAFT: Replace: NOTE: For Independent Suspension Type Axles, this operation consists of dissassembly and reassembly of the Axle Shaft Assembly and replacement of the Axle Shaft. | ||||
| Each Side | 0.3 | B | ||
| Combination Procedure: AXLE SHAFT BOOT: Remove & Replace: | ||||
| Each,Inner or Outer | 0.3 | B | ||
| Combination Procedure: AXLE SHAFT JOINT: Remove & Replace: | ||||
| Each | 0.3 | B | ||
| Combination Procedure: AXLE SHAFT SEAL: Remove & Replace: | ||||
| Each Side | 0.3 | B | ||