Idle Speed/Throttle Actuator - Electronic: Service and Repair

Removal
1. Disconnect negative cable from battery.
2. Disconnect connector from IAC valve.
3. Remove IAC valve from throttle body.




Installation
1. Install new O-ring to throttle body.
2. Install IAC valve to throttle body.
Tighten IAC valve screws to specified torque.

Tightening Torque
(a): 3.5 Nm (0.35 kg.m, 2.5 lb.ft)

3. Connect IAC valve connector securely.
4. Connect negative cable to battery.