Receiver Dryer: Service and Repair

RECEIVER/DRYER

REMOVAL




1. Remove condenser assembly from vehicle.
2. Remove the cap using a hexagon wrench.




3. Remove the filter from the receiver.




4. Remove the dryer using a plier.

INSTALLATION




Reverse removal sequence to install condenser dryer, according to instruction manual with supply parts.

NOTE:
- When replacing condenser dryer, add 40 cc of refrigerating oil the same as compressor oil.
- Do not remove the dryer from the plastic bag until Just before inserting it into the receiver.
- Install the condenser dryer with its double-layer portion facing the bottom of the receiver.

Cap Tightening Torque:
12.5 ± 2.5 N.m (1.25 ± 0.25 kg.m, 9 ± 1.8 lb.ft)