Disabling System (GS300 & GS400)
- Obtain radio anti-theft protection code from vehicle owner and record preset radio frequencies before disconnecting battery.
- Place front wheels in straight-ahead position. Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 SECONDS before working on vehicle.
- Disconnect driver air bag module Yellow 2-pin connector located under steering column lower cover, near combination switch connector. See Figure. Disconnect passenger air bag module Yellow 2-pin connector located behind finish plate at right side of glove box. See Figure. Air bag connector terminals are automatically shorted together. See Figure.
- Disconnect left and right side air bag modules Yellow 2-pin connectors located under each front seat. Disconnect left and right seat belt pretensioner Yellow 2-pin connectors located behind center pillar lower trim plate. Air bag connector terminals are automatically shorted together. See Figure.