Component Testing
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Door Ajar Switch Testing
- Ignition OFF, disconnect the harness connector at the rear hatch ajar switch.
- Test for infinite resistance between the signal terminal and the voltage supply terminal with the switch in the open position.
- If less than infinite resistance, replace the door ajar switch.
- Test for less than 1.0 ohms between the signal terminal and the voltage supply terminal with the switch in the closed position.
- If greater than 1.0 ohms, replace the rear hatch ajar switch.