LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Swift GL, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul - ECC/M60 >> Component Disassembly & Reassembly >> Oil Pump >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump: Inspection

  1. Check pump body oil seal for wear, damage or cracks. Replace oil seal (if necessary). Apply grease to oil seal lip when installing.
  2. Check driven gear-to-pump body clearance. Push driven gear against pump body. Measure clearance between driven gear and pump body. See Figure. Replace driven gear if clearance is not within specification. See OIL PUMP CLEARANCE SPECIFICATIONS  table.
  3. Measure tip clearance between both gears and crescent shaped part of pump body. See Figure. Replace drive or driven gear if not within specification.
  4. Using feeler gauge and straightedge, measure side clearance between drive and driven gears and pump body. See Figure. Replace drive or driven gear if not within specification.
OIL PUMP CLEARANCE SPECIFICATIONS

Application Thickness - In. (mm)
Driven Gear-To-Pump Body Clearance
Standard .0028-.0059 (.071-.150)
Maximum .012 (.31)
Gear-To-Crescent Clearance
Standard .0043-.0055 (.109-.140)
Maximum .012 (.31)
Gear Side Clearance
Standard .0008-.0020 (.020-.051)
Maximum .0039 (.100)
scientia non olet · About LEMON Manuals