Disassembly and Reassembly

DISASSEMBLING





1. Remove selector knob screws and then selector knob.
2. Detach illumination lamp socket from select indicator and remove select indicator.
3. Remove shift lock solenoid assembly from housing.

REASSEMBLING
Assemble in reverse order of disassembling, noting the following.
- Install shift lock solenoid assembly to housing referring to "Shift Lock Solenoid Installation".
- Apply grease to portions indicated at "A" in figure.
- Check selector for proper operation as follows.
- With knob button pushed half way, "N" to "R" and "D" to "2" shifts are available (but not any other shift)
- With knob button pushed all the way in, "2" to "L" and "R" to "P" shifts are available.