Fluid Line/Hose: Service and Repair

OIL COOLER HOSES
Rubber hoses for oil cooler should be replaced every 4 years or 75,000 km (45,000 miles), when replacing it, be sure to note the following.
- Replace clamps at the same time.
- Tighten clamps to specified torque.
- Check for fluid leakage after replacing.
- Confirm fluid level at normal operating temperature.





Tightening Torque
(a): 1.5 Nm (0.15 kg.m, 1.0 ft. lbs.)
Remaining thread for specified torque
"a": 7 - 5 mm (0.27 - 0.19 inch) as rough standard