Centering Sir Coil Assembly
- If coil assembly has been removed from steering column and is being reinstalled, go to next step. New coil assemblies are supplied pre-centered.
- Ensure front wheels face straight ahead when installing or removing a coil assembly. If coil is removed without wheels in straight-ahead position and steering wheel has not been moved, same coil can be reinstalled if coil hub also has not been rotated.
- Ensure ignition switch is in LOCK position. If there is a possibility that coil has been moved, turn SIR coil counterclockwise by hand until it reaches its stop. Turn SIR coil clockwise 2 1-2 turns and align center mark with alignment mark. Coil is now centered. See Fig 1
.
Courtesy of SUZUKI