Scroll, 6-CYL., 7-CYL. Or 10-CYL.: Jaguar

NOTE: On Jaguar, to avoid spilling refrigerant oil, install blanking plugs to compressor ports after removing refrigerant lines.

If there has been a refrigerant loss because of a burst line for example, go to next step. If reinstalling an existing compressor, remove blanking plugs and drain, measure and discard old refrigerant oil from compressor. Using refrigerant oil, flush compressor and drain thoroughly. Fill compressor with refrigerant oil equal to amount drained from compressor, plus amount recovered during refrigerant recovery.
Remove blanking plugs and drain, measure and discard refrigerant oil from old compressor. Fill replacement compressor with refrigerant oil equal to amount drained from old compressor. Install blanking plugs to compressor ports. When replacing components, add specified amounts of refrigerant oil, plus amount recovered during refrigerant recovery. See COMPONENT REFRIGERANT OIL CAPACITIES (JAGUAR - NIPPONDENSO) table.

COMPONENT REFRIGERANT OIL CAPACITIES (JAGUAR - NIPPONDENSO)

Component

Ounces

Condenser

⁽¹⁾ 1.4

Evaporator

⁽¹⁾ 1.4

Receiver-Drier

⁽²⁾

⁽¹⁾	Plus amount recovered during refrigerant recovery.

⁽²⁾	Only add amount recovered during refrigerant recovery.