LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Swift GA, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Air Conditioning Compressor Servicing >> Ford FS-10 >> Shaft Seal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shaft Seal: Removal

  1. Hold clutch plate stationary and remove clutch plate center bolt. Remove clutch plate. If clutch plate cannot be removed by hand, use an 8 x 1.25-mm bolt threaded into clutch plate to remove clutch plate and shim(s). See Figure.
  2. Remove shaft seal felt from nose of compressor. Thoroughly clean seal area of compressor using low-pressure compressed air and a lint-free cloth. Remove compressor shaft seal internal snap ring. Position shaft seal remover over compressor shaft.
  3. Push shaft seal remover downward against seal. Ensure end of shaft seal remover is engaged with inside of seal. Hold hex part of seal remover and rotate shaft seal remover handle clockwise to expand remover tip inside seal. Pull shaft seal from compressor.
scientia non olet · About LEMON Manuals