Console Rear Trim Plate Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Console Rear Trim Plate Components

Courtesy of SUZUKI OF AMERICA CORP.

CONSOLE REAR TRIM PLATE COMPONENTS REFERENCE

Callout	Component Name
1	Console Rear Bolt Covers (Qty 2) Move the seat forward in order to access the rear bolt covers. Use a flat bladed plastic trim tool to remove the covers.
2	Console Trim Plate Screws (Qty 4) CAUTION: Refer to FASTENER NOTICE in Cautions and Notices. Tightening torque 2 N.m (18 lb in)
3	Console Trim Plate Assembly - Rear Disconnect the electrical connections. If replacing the Console Trim Plate, transfer all necessary components.
4	Retainer Clips (Qty 1)