LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Swift GA, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Mechanical) >> Repair Instructions >> Engine Mount Replacement - Right Side >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Right Upper Front Engine Mount Bracket Bolt
G04841425Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the air cleaner assembly. Refer to REMOVAL PROCEDURE .
  2. Remove the drive belt. Refer to REMOVAL PROCEDURE .
  3. Support the engine. Refer to ENGINE SUPPORT FIXTURE .
  4. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  5. Remove three upper engine mount bracket bolts (1).
  6. Loosen right upper front engine mount bracket bolt (2).
    Fig 2: Removing Mount & Lower Bracket
    G04841426Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove the upper engine mount bracket nuts (1).
  8. Remove the lower bracket bolts (2).
  9. Remove the ABS connector clip from the frame.
  10. Remove the mount (3) and the lower bracket (4) from the vehicle.
    Fig 3: Removing Engine Mount From Lower Bracket
    G04841427Courtesy of SUZUKI OF AMERICA CORP.
  11. Remove the upper bracket bolt (1) from the bracket.
  12. Remove the upper bracket.
  13. Remove the engine mount (3) from the lower bracket (4).
scientia non olet · About LEMON Manuals