Third Gear Band Assembly Removal

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: 4-5 CLUTCH ASSEMBLY REMOVAL .

Special Tool

DT-47599 Anchor Bolt Socket

Fig 1: Identifying Holding Fixture Bolt

Courtesy of SUZUKI OF AMERICA CORP.

Loosen the holding fixture bolt (2) and remove holding fixture bolt (1) to allow access to the third gear anchor bolt.

Fig 2: Removing Third Gear Anchor Bolt With O-Ring Seal
Courtesy of SUZUKI OF AMERICA CORP.
Using the DT-47599 remove the third gear anchor bolt (64) with the o-ring seal (65).

Fig 3: Identifying Third Gear Band Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Remove the third gear band assembly (16) from the transmission case assembly.