Brake System (Complete): Remove, Install, and Overhaul
WARNING: This page is about the Swift GA, Automatic, which is a different variant/trim than selected.
Includes: Overhaul Calipers and/or Wheel Cylinders. Replace Brake Shoes and/or Pads. Clean, lube and/or replace Brake Hardware as necessary. Inspect Master Cylinder, all Hoses and bleed Brake System. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All Wheels,w/Rear Drum Brakes,w/ABS | 4.0 | B | ||
| All Wheels,w/Rear Drum Brakes,w/o ABS | 3.8 | B | ||
| Combination Procedure: BRAKE HOSE: Replace: | ||||
| Each Additional | 0.2 | B | ||
| One,w/ABS | 0.5 | B | ||
| One,w/o ABS | 0.3 | B | ||
| Combination Procedure: DISC ROTOR: Replace: | ||||
| FWD, Front,Each | 1.6 | B | ||
| Combination Procedure: WHEEL BEARING: Replace: | ||||
| FWD, Front Wheel | 1.3 | B | ||
| FWD, Rear Axle or Wheel,One Side | 0.1 | B | ||
| Combination Procedure: WHEEL CYLINDER: Overhaul: | ||||
| Off Vehicle,w/ABS,Each | 0.7 | B | ||
| Off Vehicle,w/o ABS,Each | 0.5 | B | ||
| On Vehicle,w/ABS,Each | 0.5 | B | ||
| On Vehicle,w/o ABS,Each | 0.3 | B | ||
| Combination Procedure: WHEEL CYLINDER: Replace: | ||||
| Each,w/ABS | 0.5 | B | ||