LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Swift GA, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul - ECC/M60 >> Component Disassembly & Reassembly >> Forward Clutch >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Forward Clutch: Reassembly

  1. Apply ATF to new inner and outer seals. Install inner and outer seals to clutch piston. Carefully install piston into input shaft drum.
  2. Install piston return springs and seat. Compress return springs using spring compressor and an arbor press. Install snap ring. Ensure snap ring is securely fitted in 4 projections of spring seat.
  3. Install in order: plate, disc, plate, disc, plate, disc and flange. Install clutch plate snap ring. Measure height between snap ring and clutch flange. Clearance should be .079-.106" (2.01-2.69 mm). If height is not within specification, replace flange. Flange is available in 2 thicknesses: .118" (3.00 mm) and .133" (3.38 mm). Check piston for proper movement by applying compressed air through oil hole in input shaft.
scientia non olet · About LEMON Manuals