Passenger-Side Air Bag Module: Installation

To install, position passenger-side air bag module into vehicle upper dash pad. Install 5 retaining screws. Torque 2 upper side screws to 49 INCH lbs. (5.5 N.m) and 3 bottom center screws to 16.5 ft. lbs. (22.5 N.m).
Reconnect the passenger-side air bag module connector and re-engage the CPA clip. Install glove box. Activate the SIR system. See DISABLING & ACTIVATING AIR BAG SYSTEM .

Fig 1: Removing Passenger-side Air Bag Module

Courtesy of SUZUKI