LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Swift GA, Automatic >> Repair and Diagnosis >> General Information >> Restraints >> Air Bag Deactivation Procedures >> LEXUS >> Disabling & Activating Air Bag System >> Disabling System (RX300)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disabling System (RX300)

  1. Obtain radio anti-theft protection code from vehicle owner and record preset radio frequencies before disconnecting battery.
  2. Place front wheels in straight-ahead position. Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 SECONDS before working on vehicle.
  3. Disconnect driver air bag module connector located under steering column, near combination switch connector. See Figure.
  4. Using screwdriver, pry out glove box door finish plate. Unplug passenger air bag module Yellow 2-pin connector located in upper right side of glove box opening. See Figure. Air bag connector terminals are automatically shorted together.
  5. Disconnect left and right side air bag module Yellow 2-pin connectors. The connectors are located under the front edge of each front seat. Disconnect left and right seat belt pretensioner Yellow 2-pin connectors located behind center pillar lower trim plates. Door scuff plates and opening trim will have to be removed before removing center pillar lower trim plates. Air bag connector terminals are automatically shorted together. See Figure.