LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Swift GA, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Manual A/C-Heater Systems) >> Component Testing >> Compressor & Condenser Fan Relays
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Compressor & Condenser Fan Relays

WARNING: This page is about a different car, the 2001 Suzuki Vitara, 2001 Suzuki Grand Vitara, 2000 Suzuki Vitara, and 2000 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Disconnect relay electrical connectors, and remove relay. Attach ohmmeter leads to relay terminals No. 1 and 2. Continuity should exist. If continuity does not exist, replace relay. Remove ohmmeter. Apply battery voltage to relay terminals No. 1 and 2. SeeFig 1 orFig 2 .
  2. Attach ohmmeter leads to relay terminals No. 3 and 4. Continuity should not exist. Apply battery voltage to relay terminals No. 1 and 2. Continuity should exist with battery voltage applied. If continuity does not test as specified, replace relay.
Fig 1: Testing Compressor Relay
G95A60103Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Testing Condenser Fan Relay
G90D03665Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals